Static Vehicle Characteristics: Sprung Mass Table
(Standard Interface)Setup → Mass Properties → Sprung Mass Table
(Standard Interface) Simulate → Full-Vehicle Analysis → Static and Quasi-Static Maneuvers → Static Vehicle Characteristics → 
The table like interface provides the user with an easy way of looking at a list of parts and the % sprung mass value and SVC array which can be toggled.
For the option: | Do the following: | |
|---|---|---|
Assembly | Select an assembly whose parts sprung mass variables you want to modify. The menu lists all open assemblies. (When opened from Adjust menu). Display current selected assembly in SVC event dialog box (When opened from SVC event dialog box). | |
Subsystem | Select the subsystem whose parts sprung mass percentage you want to modify. The menu lists all open subsystems. (When opened from Adjust menu). The menu lists all subsystems from current selected assembly in SVC event dialog box (When opened from SVC event dialog box). | |
Filter Symmetry | Filter parts by symmetry, asymmetry or both. ■Yes - Shows symmetry parts ■No - Shows asymmetry parts ■Both - Shows symmetry as well as asymmetry parts | |
Part Name | Displays a list of the parts in the Front/Rear svc array and of minor role any from the current assembly. | |
Mass | For each part in the list, provides the current mass. This field is for information and cannot be edited from the table. | |
% Sprung Mass | For each part in the list, provides the current sprung mass percentage. | |
SVC Array | For each part in the list, provides information as to whether the part is to be included in the front or rear array. If the part is listed as "any", it will not be included in either array specification, so will be considered fully sprung in the calculations. | |
Display: Single and | Select to display some or all the parts that exist in the Front/Rear svc array and also parts from subsystem with minor role any. In addition, you can select to display left or right parts, or both. Note: Regardless of which parts are displayed, changing one of the % sprung mass in a symmetric pair automatically changes the corresponding % sprung mass. Therefore, your template-based product always maintains symmetry when you perform modifications using the Sprung Mass Modification Table. | |
Show SVC Array: Any and | Select to display some or all the parts with SVC type Front/Rear along with parts with SVC type any. In addition, you can select to display all the part by selecting Both. | |
Toggle Selection To | Select one of the options presented next: | |
Front (If modifying for front SVC array) | Change the SVC array type to front | |
Rear (If modifying for rear SVC array) | Change the SVC array type to rear | |
Any | Change the SVC array type to any (Parts with SVC Array type any will not be included into calculations and considered as fully sprung parts) | |