Adams Car Package > Adams Driveline > Running Analyses > Setting up RPM Sweep Analyses

Setting up RPM Sweep Analyses

An RPM-sweep Analysis is an Adams Driveline full-vehicle analysis.

Adams Driveline sets up the initial velocity according to the RPM values you specify. A motion drives the simulation and applies the RPM-sweep law to the driveline.

To set up an RPM-sweep analysis:

1. From the Simulate menu, point to Full-Vehicle Analysis, point to Driveline Tests, and then select RPM Sweep.

2. Press F1 and then follow the instructions in the dialog box help for RPM-Sweep Analysis.

3. Select OK.