To access the Create/Modify Vibration Actuator dialog box
1. From the Vibration menu, point to Build, point to Input Channel, and then select New or Modify.
It does not matter which option you select.
2. Using the pull-down menu in the dialog box, select Use Existing Actuator.
3. Perform one of the following:
■To modify an existing actuator, right-click in the Vibration Actuator Name text box, point to the actuator name, and then select Modify.
■To create a new actuator, right-click in the Vibration Actuator Name text box, point to Vibration_Actuator, and then select Create.