list_info output_control debug
Allows you to print out information on the current values set to control the debugging of an ADAMS data set. You may instruct Adams View to print this information to the "Info Window" or to a file.
Format:
list_info output_control debug |
|---|
model_name = | an existing model name |
brief = | on/off |
write_to_terminal = | on/off |
file_name = | string specifying the file path |
Example:
list_info output_control debug & |
|---|
model_name = | model_1 & |
brief = | on & |
write_to_terminal = | off & |
file_name = | "C:\info.txt" |
Description:
Parameter | Value Type | Description |
|---|
model_name | AN EXISTING MODEL | Specifies an existing model. |
brief | ON_OFF | Specifies whether to use the brief form (default) or an extended form of the requested information to be displayed. |
write_to_terminal | ON_OFF | Specify if the information requested is to be sent to the informational window or not. |
file_name | STRING | Specify that the information requested is to be sent to a file with the name specified with the parameter. |
Extended Definition:
1. You can expect information on the following parameters.
■DUMP Instructs Adams to write the internal representation of your data set.
■EPRINT Instructs Adams to print simulation information for each integration step and convergence information for each iteration.
■VERBOSE Instructs Adams to output full rather than partial diagnostics.
■REQDUMP Instructs Adams to dump request output at each iteration.
■JMDUMP Instructs Adams to dump the Jacobian Matrix at each iteration.
■RHSDUMP Instructs Adams to dump the if you want to dump the state vector at each iteration.
■DOF Instructs Adams to print a degree-of-freedom table in the tabular output file.
■TOPOLOGY Instructs Adams to print topological data in the tabular output file.
2. You may identify a model by typing its name or by picking it from the screen. If the model is not visible on the screen, you must type the name. You may also find it convenient to type the name even if the model is displayed. You must separate multiple model names by commas. If the model is visible in one of your views, you may identify it by picking on any of the graphics associated with it. You need not separate multiple model picks by commas.
3. The ‘write_to_terminal’ parameter is most likely be used in conjunction with the FILE_NAME parameter to get the information put to a file only.
Tips:
1. If the model is visible in one of your views, you may identify it by picking on any of the graphics associated with it.