Creating the Output Shaft
You now create the output shaft. You first create two construction frames to locate the output shaft and then you create a general part for the output shaft.
To create the construction frames:
1. Create the first construction frame:
■Construction Frame: output_shaft
■Type: single
■Location Dependency: Delta location from coordinate
■Coordinate Reference: cfs_input_shaft
■Location: -100, 80, 0
■Location in: local
■Orientation Dependency: Delta orientation from coordinate
■Construction Frame: cfs_input_shaft
■Orientation: 0, 0, 0
2. Select Apply.
3. Create the second construction frame using the same specifications used for the first construction frame, except for:
■Construction Frame: output_shaft_end
■Coordinate Reference: cfs_output_shaft
■Location: 0, 0, 200
■Orientation Dependency: Orient axis to point
■Coordinate Reference: cfs_output_shaft
■Axis: Z
4. Select OK.
To create the output shaft general part:
1. Use the General Part Wizard to create the output shaft general part with the following specifications:
■General Part Name: output_shaft
■Type: single
■Geometry Type: Link
■Coordinate Reference # 1: cfs_output_shaft
■Coordinate Reference # 2: cfs_output_shaft_end
■Radius: 10
■Color: blue
2. Select OK.