ISO Ride Index

Ride -> Full-Vehicle Analysis -> ISO Ride Index

Ride -> Full-Vehicle Vibration Analysis -> ISO Ride Index

Define the parameters for ISO Ride Index.

For the option:	Do the following:
Ride Index	This is a read only field. Adams Car Ride will display the calculated output Overall/Point Vibration Total Value here.
Output	Select the appropriate output you want to calculate: OVTV, Feet PVTV, Seat PVTV and Back PVTV.
Analysis	Select the appropriate analysis for calculating its Ride Index.
Depending on your output option selection, the following four tabs will be disabled or enabled. The Overall tab is enabled only for calculating OVTV output.
Define acceleration requests, scaling factors and ISO weighting curves (for driver/passenger Feet, Seat and Back locations)	■Specify the acceleration result set components for X, Y and Z directions at driver/passenger Feet, Seat and Back locations. ■Specify the directional and overall scaling factors for each of these location and direction. ■Specify the ISO frequency weighting curves for each of these locations and directions.