For the option: | Do the following: |
|---|---|
Tire Property | Select the tire property file to be converted |
Nominal Load | Define the nominal load of the tire, preferably close to the static load on the tire when mounted under the vehicle. |
Load Values | Define the load values for which virtual tire test data should be created, covering the tire’s working range, preferably at least 3 values |
Camber Angle | Define the camber values for which virtual tire test data should be created, covering the tire’s working range, preferably at least 3 values |
Slip Angle | Define the slip angle values for the combined slip virtual test data covering the tire’s working range, preferably at least 6 values |
Relaxation | Check this box if the original tire model is able to describe transient effect of the tire |
Advanced Dynamics | Check this box if the original tire model has non-rolling tire stiffness in longitudinal and/or lateral direction, and/or will show parking torque at stand-still. |
Enveloping | Check this box if the original tire model is able to describe the non-linear enveloping effect when rolling over short wavelength obstacles. |
Belt Dynamics | Check this box if the original tire model is able to describe the belt dynamics effects. |
Tire Width | Define the tire width, default is read from the tire property file. Relevant when the ‘Enveloping’ is checked. |
Tire Mass | Define the tire width, default is read from the tire property file. Relevant when the ‘Belt Dynamics’ is checked |