For the option: | Do the following: |
|---|---|
Forward Velocity | Defined the forward velocity for the tire testing when generating the virtual test data. |
HMax for simulations | When the original tire model requires a specific HMAX value, it can be defined here. |
Total Wheel Mass | The total wheel mass (tire + rim) is important for generating the Belt Dynamics virtual test data. The default value can be adjusted here. |
Include camber effect at combined slip | Check this box if you want to add virtual combined slip data for all ‘Camber Angles’ defined. |
Include Fy effects on loaded radius | Check this box if you want to add side force effects on the tire loaded radius virtual test data. |
Cleat Geometry | |
Height | Height of the cleat to be used for the enveloping and belt dynamics virtual tests |
Length | Length of the cleat to be used for the enveloping and belt dynamics virtual tests |
Bevel Edge | Bevel Edge value of the cleat to be used for the enveloping and belt dynamics virtual tests, see also Cleat Geometry. |
Maximum number of parallel simulations | Define the number of parallel simulation that can run for generating the virtual tire test data. |